Fire protection of production (pharmaceuticals)

Avoid fire and consequential damage with Inergen

When fire breaks out in a production hall, it can easily result in damaged machinery and lead to extensive operating losses. The damage may be caused not only by the actual fire but also by the extinguishing method. Water, for example, may result in considerable secondary damage.

With Inergen you get a solution that extinguishes fire quickly and efficiently – and completely without secondary damage.

5 good reasons for using Inergen fire protection in production halls

  • Rapid fire detection.

  • Effective ‘3D-extinguishing’ – Inergen penetrates all cavities and machinery.

  • Safe for people – you can stay in production area when the system is activated.

  • No consequential damage to materials – quick resumption of operations.

  • The Inergen system has obtained all necessary approvals.

Effective, safe fire protection of production with Inergen

Inergen is a highly efficient extinguishing method. It can typically extinguish a fire completely in less than 40 seconds and prevent re-ignition.

Inergen consists of 100% natural gases. It thus causes no consequential damage to either production or electronics. It makes it possible to resume operations immediately after a system has been activated. It is, moreover, safe for employees to remain in the production hall when the Inergen is released.

An Inergen system from Fire Eater is built to the highest quality and has all the necessary approvals. As the only system with inert gases, it is designed so that tests may be performed after installation. You then know you can feel completely safe when choosing fire protection from Fire Eater.

Why use Inergen for firefighting?

It extinguishes fire quickly – in only 40 seconds.
No re-ignition later. The fire is completely extinguished.
Harmless to humans and production.
Prevents secondary damage.

How Inergen works in production halls

The Inergen system uses sensitive detectors that respond automatically to fire and release Inergen via nozzles.

The system uses so-called ‘3D-extinguishing’. This means that the gas – released under pressure – spreads throughout the hall – even in hard-to-reach places. This makes the extinguishing method extremely effective and suitable for production halls.

 

Fire Eater A/S firefighting

Which solutions should you choose for fire protection of your production?

Fire Eater has developed a number of special solutions that make it possible to adapt the solution to your specific requirements. The Inergen system is built for great flexibility and you can, for example, place the bottle battery outside the production hall or in a separate room. The system can also be quickly and easily extended into other areas.

Receive no obligation advice from specialists

With no obligation to buy, you can receive a review of your specific fire protection requirements and advice on which solution would be the right one for you. We are also more than happy to prepare an offer for you.

Get contacted by a fire protection specialist

Fill out the contact form and we will contact you as soon as we can.

    * We treat your data with respect and do not pass it on to third parties. You can request your data be deleted at any time. See our privacy and cookie policy in the menu under "About Fire Eater"

    Contact us today – Call tel. +45 7022 2769.

    Or write to us

    © Copyright - Fire Eater