Fire protection of buildings worthy of preservation

You are here: / / Fire protection of buildings worthy of preservation

  • Fire protection of buildings worthy of preservation

    Effective and discreet fire protection of buildings worthy of preservation with Inergen

    See our various products
    Bevaringsværdige Bygninger brandsikring med Inergen

Avoid damage to buildings worthy of preservation and unique cultural heritage

There are major consequences when a historic or listed building is completely or partially damaged during a fire. It is expensive to repair the damage and often the building cannot be used for longer or shorter periods.

In worst case, there is a loss of cultural heritage; castles, mansions, paintings, unique items etc., which are irreplaceable.

The causes of fire can be, for example, old electrical installations and cooking. Fires can also occur in connection with conversions, renovations or other building work.

Fire protection with Inergen provides optimal protection for buildings worthy of preservation. It is both effective, entirely without consequential damage from extinguishing water and can be installed discreetly.

Inergen can help you

With Inergen, you can avoid one of the worst nightmares

Fire protection of buildings worthy of preservation is not just about finding the most effective solution. It is at least as important to ensure that no consequential damage occurs after a possible fire has been extinguished.

With an Inergen system, you get a solution that typically extinguishes the fire within just 40 seconds. At the same time, you save time and money on repairing the damage from, for example, extinguishing water. In this way, you achieve the best possible protection of the building, fixtures and valuables.

With Inergen, you can avoid one of the worst nightmares: that a devastating fire spreads – and that the extinguishing of the fire leaves consequential damage

The benefits of Inergen

5 good reasons to protect against fire with Inergen in buildings worthy of preservation

  • Early detection and early activation: Smoke detectors connected to the Inergen system can detect the fire at an early stage and initiate extinguishing very early in the course of the fire.

  • Leaves no consequential damage to buildings, fixtures and valuables.

  • Quick reopening for visitors.

  • Concealed installation of the system (canisters can be stored out of the way, nozzles can be hidden in the ceiling) so that the experience for visitors is not disturbed.

  • Harmless to humans – Inergen is made up of 100% natural gases.

Visit our Knowledge Forum

Here you will find answers, inspiration and guidance as to why Inergen is the fire extinguishing technology for a safer and greener future.

Go to Knowledge Forum

Buildings worthy of preservation deserve the best fire protection

When buildings worthy of preservation and cultural treasures burn, part of our common narrative is lost. A story which is important – and which contributes to our understanding of the world that was – and which forms the basis of the world we live in. That is why we must become even better at securing our buildings worthy of preservation – and when damage occurs extinguish the fire in the most gentle way.

You can do that with Inergen.

At the same time, many old buildings have several cavities where traditional fire extinguishing agents may not reach effectively. Inergen is extremely effective in extinguishing fires in these hard-to-reach areas, which further ensures comprehensive protection of the entire building.

See what other customers are doing

Why should you use Inergen in buildings worthy of preservation?

  •  

    It only takes 40 sec.

    It extinguishes the fire quickly – in just 40 seconds.

  •  

    Zero re-ignition

    No subsequent re-ignition. The fire is completely extinguished.

  •  

    Harmless

    Harmless to humans and equipment.

  •  

    Zero damage

    Prevents secondary damage.

PreviousNext

Do you want to know more 
about Inergen?

Go to Knowledge Forum

Ask us Go to Knowledge Forum

This is how Inergen works in buildings worthy of preservation

Inergen extinguishes a fire completely without water and chemicals. When a detector registers a fire, Inergen is released via a series of nozzles and the oxygen level in the room is reduced enough to extinguish the fire. At the same time, it is safe for humans to remain in the room.

An Inergen system can be installed with great flexibility and discretion, so that it doesn’t interfere with the aesthetic expression and experience for the visitors. Nozzles can, e.g. be placed under furniture, in walls or ceilings and painted over. The piping can also be concealed completely out of the way and the cylinder bank can be placed in a separate room.

This is how Inergen works
Brandsikring uden kemikalier Fire Eater

Which solutions should you choose for fire protection of a building worthy of preservation?

Fire Eater has developed a wide range of special products that make our systems particularly suitable for buildings worthy of preservation. The fire protection can be done so discreetly that it neither disturbs the experience of the room nor conflicts with the architecture of the building. All systems are adapted to the individual building or the specific room.

See our various products

Get no-obligation advice from experts

You can obtain a no-obligation review of your requirement for fire protection and advice on which solution will be best for you. We are also happy to prepare an offer for you.

Be contacted by a fire safety specialist

Complete the contact form and we will be in touch as soon as possible.Øverst på formularen

Get in contact

See how other companies have been fireproofed with Inergen

Do you want to know more 
about Inergen?

Whether you need advice or a thorough review of your fire protection needs, our team is here to guide you every step of the way. We are committed to answering all your questions and providing the support you require.

Simply fill out the contact form, and we will promptly contact you. Or you can call +45 70 22 27 69. Your fire safety is our priority.

Get in contact.

    © Copyright - Fire Eater